Stealth Suspension

1110309230

Dodge RAM 1500/2500/3500 4x4 Control Arms Stealth Suspension 1110309230 - Dodge Full-Size Truck - Steel Control Arms for 2-3 of lift

Control Arms

These are tubular control arms constructed with Heavy Wall DOM tubing (with no split seams) in the construction of the arms AS WELL as the sleeve
This is for a set of 4. Includes 2 uppers and 2 lowers. These are sold in a set of 4, as you need uppers AND lowers to re-center your axle properly.
If you've installed a lift, you DEFINITELY need longer control arms. This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. These allow the best tire fitment as it re-centers the axle in the wheel well.
The control arms are powdercoated black.
They come ready to install, with zirc fittings, poly bushings, DOM sleeves, etc. Simply re-use your factory hardware.

2003-2009 DODGE CONTROL ARMS FOR 2 TO 3" OF LIFT HEIGHT What sets Stealth Suspension apart from other competitors? Stealth Suspension uses Heavy Wall DOM tubing (with no split seams) in the construction of the arms AS WELL as the sleeve. The issue with the competitors sleeves is they are thinner wall and simply rolled over - this leaves a gap/seam. Stealth Suspension arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness.

ColorRite Honda Passport Automotive Touch-up Paint
10 12 BUICK LACROSSE 3 6L Condenser 3794
Mix me 1039