Fairleads CH4X4 Industries CH4X4-00016

CH4X4 Industries

CH4X4-00016

Hawse Fairlead 1.0 (1.0 inch thick)

Fairleads


CNC machined from 1 inch thick USA 6000 series aluminum bar.
The 1.0 fairlead are the industry's first Hawse fairlead compatible with larger inch diameter rope tube thimbles.
This fairlead come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a machined logo.
For synthetic winch rope only.
Made in the USA

Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick. The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry's first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles. The rope slot height opening is taller to allow the larger ½" tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension "suck down" device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a machined logo. ------ For synthetic winch rope only. ------- WARNING: Always confirm that the synthetic rope cannot make contact to any sharp edges like the opening in the steel fairlead mounting plate or bumper opening. In some cases it may be required to grind this slot larger. Always sand and deburr this opening after any grinding operation.

1964-72 Chevelle Seat Mounting Rails, 4 pcs. (WTP)
13X4 5 Silver Spoke Trailer Wheel WS1345S-JG
Mix me 4431