ATV Engineering

atvWS245

ATV Engineering 2pc | 5X5.5 to 5x4.5 | 3 (1.5 per side) Wheel Adapters | 5x139.7 to 5x114.3

Spacers

You are buying a set of 2 automotive wheel adapters (and spacers), enough to widen one axle 3.00" total wheel to wheel at 1.50" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 3.00" ATV wheel spacers are 1.50" per side and will fit most any vehicle with a 5 x 5.5 (5x139.7) stud pattern where you are trying to use.

5x114.3 / 5x4.5 WHEELS

Please measure your studs (5.5" diagonally) on your vehicle first to be sure on your vehicle, then measure your wheel holes (4.5" diagonally) to ensure they will fit.

- You are receiving 4 pieces/rings with hole patter for the vehicle of 5x5.5 or 5x139.7mm and outgoing stud pattern of 5x4.5 or 5x114.3
- Thickness is 1.5" per spacer for 3" wheel to wheel!
- Studs are 1/2"-20 and there is a 87.1 mm hub. If your lug nuts are different for your vehicle, you could need to purchase new lugs. If your vehicle is 1/2-20, you can use these lug nuts to apply. If not, you will need to purchase lug nuts for the spacer and possibly the wheel.
- Vehicle studs can not extend past the adapter. They could need to be trimmed if they do.
- We can only guarantee that the adapter is as described above. We can not assure it fits your vehicle. You must measure to be positive!
- These should be professionally installed and torqued properly. Follow installation documentation for safety.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.


We offer a lifetime warranty on all our products. Other sellers do not do this!

Victor Reinz PS39131 Push Rod Gasket Set
Genuine 000 Neutral Safety Switch 0005404745
Mix me 4645