EBC Brakes

GPFAX447HH

EBC Brakes GPFAX447HH Sintered Road Race Disc Brake Pad

EAN: 0840655053118

UPC: 840655053118

Pads

A breakthrough in the EBC R&D facility in Ohio has led to the immediate launch of the new GPFAX Sintered Road Race brake pads range that delivers significant benefits over its predecessor compound the GPFA brake pad range
These new pads have been track tested by over a dozen teams and every rider unanimously approved and now prefers the GPFAX grade
Initially lab tests showed this dyno curve of performance after bedding which heralds improvements in maximum brake friction and less 'In-stop' brake variation
Track testing has shown that also the 'Heat Cycling' ability of the new material is better meaning that the pads can be raced, allowed to cool and repeat the exact same brake characteristics when raced again
GPFAX Sintered Road Race brake pads are a closed circuit use pad only and street/highway riding with this material is highly inadvisable and dangerous

A breakthrough in the EBC R&D facility in Ohio has led to the immediate launch of the new GPFAX Sintered Road Race brake pads range that delivers significant benefits over its predecessor compound the GPFA brake pad range. These new pads have been track tested by over a dozen teams and every rider unanimously approved and now prefers the GPFAX grade. Initially lab tests showed this dyno curve of performance after bedding which heralds improvements in maximum brake friction and less "In-stop" brake variation. Track testing has shown that also the "Heat Cycling" ability of the new material is better meaning that the pads can be raced, allowed to cool and repeat the exact same brake characteristics when raced again. The material quickly builds from an initial friction level of 0.6 (which in itself is a massive brake friction level rarely achieved by any competitor material) up to a huge 0.7 with a minimum in stop friction level of 0.65. This tiny fall off from 07 - 0.65 during braking would be almost undetectable by the rider allowing superb brake feedback and control at the lever and allowing feathering of the brake predictably and steadily throughout deceleration. The new material also wears better and causes lower rotor/disc damage that previous materials and should be good for 4-5 race events of typical 20-25 lap duration minimum. Pads should be discarded when less than 2.5 mm of friction material remains to avoid fluid vapor lock due to excess piston fluid volume. GPFAX Sintered Road Race brake pads are a closed circuit use pad only and street/highway riding with this material is highly inadvisable and dangerous. Such high friction levels as delivered by these pads are for ideal track conditions with race tires or slicks on prepared asphalt surfaces and NOT for use with highway tires or on the highway. This material is not ECE R 90 approved nor TUV tested with a German ABE and use on the highway is therefore illegal in many countries.

TYC 18-3170-01 Parking and Side Marker Light Assembly
Vacuum Solenoid Quattro Beetle 037906283C USB-VSV001
Mix me 1260