Cerma Treatment

VALDX-1030

Cermax Diesel Engine Treatment Package Kit 10w-30w Oil

EAN: 0650019028122

UPC: 650019028122

Motor Oils

Cermax diesel Engine treatment Package Kit 10w-30w oil
motor oil kit

*** Value Package Kit Special Value Package for diesel Automobiles. Package Kit Includes: Two (2) 2-oz Bottles Cerma STM-3 diesel Engine treatment. Five (5) Quarts of CermaX Motor Oil (chosen Viscosity), and One (1) 2-oz Bottle of Cerma Transmission Treatment if transmission option is chosen package kit for (auto or Manual) The Cerma Treatment Protocol: 1. If your engine has less than 30,000 miles, add only 1-oz of engine treatment to the engine oil. If 30,000 plus mile than add 2-oz bottle. Add when engine is hot an while running at idle.. If blow back is present, shut off engine, add engine treatment to oil and start engine immediately (note: do not forget to put back oil cap before restarting engine) After adding, do not shut off vehicle. idle at 1500 to 2000 rpms for 5 to 10 minutes and then drive car for a minimum of 30 minutes. It is preferred to drive in city stop and go traffic for the first 15 minutes, than freeway or high speed driving for 10 minutes. This is required as cerma needs to have all rpm ranges driven to provide proper distribution. 2. Put a minimum of 3,000 plus miles after adding treatment before CermaX oil change (Next Step). 3. Change oil using cermaX motor oil. 4. If transmission option choosen, add transmission treatment at the same time. *** Important: Do not add engine treatment and oil at the same time! add engine treatment, Drive a Minimum of 3,000 plus miles and then change oil with cermaX motor oil. Your part of the process is now complete. Over the next 90 days of driving, the cerma process will complete its process on it's own. This treatment should last 200.000 Miles. Money Back Guaranteed for 90 days!

ACDelco 15-63672 Professional Air Conditioning Evaporator Core
Toyota 85720 72020 Window Regulator Assembly 85720-72020
Mix me 4535