Cerma Treatment

VAL-530

Cerma Gas Engine Treatment Package Kit 5w-30w Oil

EAN: 0650019010233

UPC: 650019010233

Engine & Oil

Cerma package kit comes with 5-quarts motor oil 5w-30w oil viscosity and 1-2-oz bottle of gas engine treatment
Cerma Gas Engine treatment Package Kit 5w-30w oil

*** Value Package Kit Special Value Package for Gasoline Automobiles. Package Kit Includes: One (1) 2-oz Bottle Cerma STM-3 Engine treatment. Five (5) Quarts of Cerma Motor Oil (chosen Viscosity), and One (1) 2-oz Bottle of Cerma Transmission Treatment if transmission option is chosen package kit for (auto or Manual) The Cerma Treatment Protocol: 1. If your engine has less than 30,000 miles, add only 1-oz of engine treatment to the engine oil. If 30,000 plus mile than add 2-oz bottle. Add when engine is hot an while running at idle.. If blow back is present, shut off engine, add engine treatment to oil and start engine immediately (note: do not forget to put back oil cap before restarting engine) After adding, do not shut off vehicle. idle at 1500 to 2000 rpms for 5 to 10 minutes and then drive car for a minimum of 30 minutes. It is preferred to drive in city stop and go traffic for the first 10 minutes, than freeway or high speed driving for 10 minutes. This is required as cerma needs to have all rpm ranges driven to provide proper distribution. 2. Put a minimum of 1,500 plus miles after adding treatment before oil change (Next Step). 3. Change oil using cerma motor oil. 4. If transmission option choosen, add transmission treatment at the same time. *** Important: Do not add engine treatment and oil at the same time! add engine treatment, Drive a Minimum of 1,500 plus miles and then change oil with cerma motor oil. Your part of the process is now complete. Over the next 90 days of driving, the cerma process will complete its process on it's own. This treatment should last 200.000 Miles. Money Back Guaranteed for 90 days!

Pik-A-Nut 362792 Block Freeze Plug
HEADS UP
Mix me 4428