R&D Watercraft

R&D C19

R&D C19 MONSTER WHEEL

Superchargers

R&D now offers the new C19 Monster Pro Limited Wheel Kit. The new Billet C19 Monster Compressor Wheel is specifically developed to pump maximum boost and CFM possible utilizing the O.E.M. compressor housing. R&D has taken full advantage of the IJSBAs new rule allowance to change out the compressor wheel backing plate to an aftermarket part. R&D has increased the exducer size and deck area to pump as much air as the stock housings will possibly allow with bolt in parts. The C19 pumps out 19 pounds of boost @ 8600-8800 rpm and up to 20 pounds of boost @ 9000 rpm. The C19s large exducer wheel diameters along with an aggressive blade design are the key to pumping more CFM airflow volume throughout the entire RPM range. The new R&D C19 series compressor wheels offer the highest levels of boost CFM airflow and horsepower gains available for the 1.8 Yamaha engine in Pro Limited Class category. The R&D C19 Monster Wheel R&D Racing Camshafts and a properly tuned fuel and E.F.I system can achieve up to 400 horsepower. If Max Boost is truly what youre looking for look no further and give the pros at R&D a call. The new C19 has been tested against all other existing wheels on the market that fall into Pro Limited Class Specs and is guaranteed to out boost and out power them all! The C19 wheel requires the use of an intercooler system capable of flowing 500 CFM (Most on the market are not even close to 500 CFM and are restrictive). R&D suggests the use of an R&D Racing Intercooler Kit (600+ CFM rated) R&D Rising Rate (adjustable) Fuel Pressure Regulator Kit R&D Super Clutch System and an R&D Pro Limited ECU Program upgrade to ensure proper engine tuning and proven (safe) rev control functions. R&D also suggests upgrading to R

1998 - 2002 Kawasaki ZZR600: Rear Brake Master Cylinder
General Motors Hose 15971649
Mix me 344