Soupy's Performance

1LL-260

CBR500R Single Style Threaded Lowering Link

Lowering Kits

Our turnbuckle style lowering link will adjust the rear of the bike infinitely between stock height and a 4 inch drop (unless noted differently next to the listing below). No need to remove the link from the bike.

Our turnbuckle style lowering link will adjust the rear of the bike infinitely between stock height and a 4 inch drop. No need to remove the link from the bike...just loosen the nuts and rotate the center hex body. You do not need to remove bolts and find a way to hold the bike up while you are doing it! The center hex body is gold zinc plated steel or stainless steel, NOT aluminum. The ends are steel, have a 1/2" thread and are zinc plated steel for strength and corrosion resistance. There are also 4 inserts that make up the difference in the diameter and length of the stock bearing setup. THIS IS A DIRECT BOLT-ON ITEM! The ball bearing is hardened steel with a Teflon race. Aluminum threads DO NOT last and are dangerous! Keep in mind that after the bike is lowered, the kickstand will need to be shortened as well. Our Adjustable Kickstands Are Listed Here

Bosch 130821017 Front Door Window Motor
Four Seasons 39243 Expansion Valve
Mix me 3600