Diamondite

DIA-303

Diamondite® Glasswork Restorer

EAN: 0082045634433

UPC: 082045634433

Car Polishes & Waxes

Wipe away water spots from automotive glass with Diamondite Glasswork Restorer
Our specially formulated cleansing polish removes mineral deposits and water spots to leave glass impeccably clear and clean
Diamondite Glasswork Restorer will not scratch or distort glass
4 oz
VOC Compliant

This product is formulated for glass - every precaution was taken to create a safe yet uncommonly effective glass polish. By gently burnishing the outermost glass, little by little, there is no risk of distorting the glass. By hand or machine application, DIamondite Glasswork Restorer works safely to polish away imperfections and leave glass smooth and flawless. Directions: 1. Screw the drill adapter into the backing plate and tighten with a wrench. Insert the adapter into your electric drill and tighten the chuck. Press a 4 inch orange foam pad onto the backing plate. 2. Dispense an X of Diamondite Glasswork Restorer across the pad. If you are using a drill or rotary polisher, set the maximum speed at 1800 RPM. If using a dual action polisher, set the speed to 4. Apply the polish on about a quarter of the windshield at a time. Work in an overlapping motion until the polish starts to dry. There is no need to apply pressure to the machine. 3. Use the a soft microfiber towel to remove residue. If water spots are not completely removed, repeat this process. 4 oz. VOC Compliant

Walker Walker 49 State Ultra Direct Fit Converter 50556
Pollak 51 904 Master Disconnect Operated 51-904
Mix me 4087