Reduces the amount of effort needed to operate the clutch lever. Complete clutch disengagement is still achieved. Installs easily. 6 Speed models with a little bit of grinding on the hook

1. Remove transmission cover.
2. Disconnect clutch cable from coupling, and remove clip from ball mechanism.
3. Unscrew clutch cable from transmission cover, and remove o-ring.
4. Easy pull clutch kit installs on ramp with just nut and bolt
5. There is a spacer that comes with the kit that goes on the end of the clutch cable. Once the spacer is on the O-ring is replaced and the clutch cable can be screwed back into the transmission cover.
6. Then hook the clutch cable back into the coupler and attach the coupler to the Easy Pull Clutch piece which is now bolted to the ramp mechanism. Reinstall the 3 ball bearings and the ramp mechanism and replace the clip.

SOLD EACH