Davies Craig

8070

Davies Craig EWP150 Alloy & Digital Controller Combo (12V) Part No: 8070

EAN: 9311669080700

Engine Cooling & Climate Control

This high capacity EWP 150 (40 US Gal/Min) is designed to replace and/or complement the existing belt driven mechanical water pump and when fitted with the Digital Controller, replaces the thermostat.
Minimise the parasitic power losses running a mechanical water pump at high speed when not needed
Maximise engine warm-up & minimise the effects of heat soak by operating the EWP 150 after engine shut down.
Kit Contents: EWP150 Alloy Pump, EWP & FAN Digital Controller, Inline Adaptor, Wiring Harness with 10A Fuse, Rubber Sleeves 3mm (4), Hose Clamps (4), Hardware Bag: Relay, Scotch Lock, Ring Terminal, Self Tapper

The revolutionary EWP®150 is now available in light weight aluminium bundled with our Digital Controller. Designed with the high-performance pro, sprint, tarmac, circuit and drag racer in mind this rugged Alloy electric water pump has AN-16 internal threads at inlet and outlet for neat, tight, dash fitting applications. All the same exciting features offered on the EWP®150 are here on the street-smart alloy EWP. The EWP®150 has the advantage of offering more consistent coolant flow independent of the engine revs. The fitment of the EWP® & Fan Digital Controller to your engine, which is scientifically calibrated to manage the volume/flow of engine coolant with the corresponding increase in coolant temperature within the engine's cooling system. From start-up, the EWP® & Fan Digital Controller will 'system check' the EWP®150 and Thermatic Fan operating the pump and fan for approx. 10 seconds. Low engine temperature, low flow (10-on - 30-off pwm) reduces engine warm-up time, arriving at your targeted/set temperature quicker, assisting control the engine temperature within your -5 to +3 degree targeted/set temperature range. The Electric Thermatic Fan/s will be deployed at +3◦C above targeted/set temp if slower travel (traffic) or engine idle conditions continue. The EWP® & Fan Digital Controller will continue operating after a hot engine shut down for a approx. 2 minute period to help prevent damaging heat soak.

Steinjäger Tubing, Welded and Chrome Plated 4 Link Tubes 1.000 x 0.095 HREW 5/8-18 25.32 Inches Long
Engine Clutch 4Runner Premium 1621075060 1621075060KM
Mix me 2888