Kevins Offroad

KOR-2082

Hard-KOR Secondary Steering Stabilizer: WJ's fits stock track bar - Outstanding Death Wobble Resistance

EAN: 0887753008169

UPC: 887753008169

Damper & Steering Stabilizers

The Kit includes one new Hard-KOR steering stabilizer
Two Heavy Duty clamps (size varies per your track bar thickness)
Mounting hardware for both ends of the stabilizer
(Currently we do not offer the hardware kit separately.)

If you are tired of getting smashed when you are Offroad, use this secondary stablizer kit that can be used to relocate your primary steering stablizer location upwards and out of the rocks and stumps to smooth out the ride.

We've done a lot of Death Wobble cures here at the shop, and have found that for some reason, the WJ Grand Cherokees seem to have a higher propensity for Death Wobble than the XJ Cherokees and ZJ Grand Cherokees do. We think this is because the steering stabilizer is mounted between the tie-rod and the axle on the WJ, rather than between the drag link and the axle like on the XJ/ZJ/TJ.

Use the kit to add a second stabilizer between the drag link and the track bar, which has cured at least twenty three cases of "uncurable" WJ Death Wobble in the last 6 months.

(Note: The included photo shows two stabilizers in order to show the primary and secondary mounting locations. This kit includes one Hard-KOR stabilizer and the mounting kit to install it in the secondary mounting position. We HIGHLY recommend you also pick up a KOR-9309 PRIMARY stabilizer kit replacement stabilizer packaged along with a KOR-1002 mounting kit to replace your PRIMARY stabilizer at the same time for the maximum possible Death Wobble resistance and steering smoothness possible. You will get a huge value out of these two items installed in conjunction with each other!)

There are two kits: the 1.00" OD kit for factory trackbars, and the 1.250" OD Heavy Duty track bar like the adjustable JKS model.

Genuine Nissan (20080-JM00A) Exhaust Diffuser Assembly
ZF Transmission Pan Gasket 09L321371A
Mix me 2912