Kevins Offroad

KOR-7400

Hard-KOR Steering Box Brace for '84>'01 XJs (powdercoated)

EAN: 0887753008701

UPC: 887753008701

Gear Boxes

Fits both 6cyl and 4cyl models
No cutting, welding, modifying necessary
Comes powdercoated to resist the elements
Includes all the hardware you need to bolt it right in

The Hard-KOR steering box brace comes powdercoated to resist the elements and includes all the hardware you need to bolt it right in. No cutting, welding, modifying necessary. Fits both 6cyl and 4cyl models. You can re-use the worthless front factory skid if you elect to do so, but you'll need to modify the rear tabs ever so slightly so that they don't come inboard as far.

Install Instructions: Unbolt your front two bolts on the front sway bar and leave the rear two in. You will need to remove the useless Mopar factory front skid plate if you have the misfortune of having one. First, remove the forward-most bolts from your anti-sway bar clamps. Simply place the brace in position. Hand-thread the longer bolts (included) and flat washers through the holes on the brace, then through the forward-most holes of the sway bar clamp, sandwiching the front sway bar mount tabs against the frame. Now, hand-thread in the old sway bar bolts into half of the steering gear clamp around the steering gear and tighten the two bolts down using the included lock nuts. Tighten all of the brace bolts down and you're done. The bracket may deflect slightly as you're tightening it down.

If you still have the stock front anti-sway bar, you'll need to purchase our optional Energy Suspension grease-able anti-sway bar bushing kits (search for "bushings") which has more clearance than the stock bushing clamps do, and allows the brace to mount to the frame properly without having to mess with modifying the factory clamps. Pls mention this as well in the order.

NOTE: A select few have had fitment issues with respect to width of their frame rails. If your Cherokee has been in a front end collision and you'd prefer to *NOT* modify the frame mounting holes by "ovaling" them out, then this product isn't for you.

Mcquay-Norris SL633 Sway Bar Link Or Kit
Wheel Weight Srs 0 75 Oz T075Z
Mix me 4104