Gadget Zone

BCE0145

GadgetZone (US Seller) MPPT Solar Charge Controller CMTP02 20A 12V 24V Support Over Load/Wrong Connection/Over Charge/Over Discharge/Auto Cut/Auto Recovery Protective Functions

EAN: 6955899031311

Energy Controllers

MPPT solar charge controller MPPT10-60: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%
MPPT controller has perfect SOC function, control charge current, and supply power to the loads. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature
Always keep the battery on fill voltage condition. Prevent the battery from over-charging, over-discharging, reverse charging to solar panels during nights. Reverse polarity protection for battery, solar panel. Thunder protection
When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working
According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25 C condition, locked by the CPU procedure, cannot adjust)

Connection: This product has 6 terminals with clear sign.

Warning: Before connecting to the solar panel, please connect the controller to the battery; do not use solar panel supply power to the loads directly.

Note:
- Do not use lamplight to charge the solar panel (lamplight is too weak to charge)
- DC power source to replace the solar panel will cause troubles to controller
- Choose the suitable wire which diameter should not be too small, please refer to the parameter

Indicate light and button:
- When Red LED (CHARGE) is on, battery is charged up strongly; When Red LED is flickering, battery is MPPT charged up in constant voltage; when Red LED is oft charge off
- When Green LED (LOAD) is on, loads are working; when Green LED (LOAD) is off, loads stop working
- Three Color-changing LED (BATTERY), When light is red, it indicates low voltage, green indicate battery full charged, orange indicate normal status.

Trouble solution:

* Phenomenon: Green LED off, battery indicator LED is red
Reason: Low voltage of battery
Solution:
A: Cut off the power, disconnect the load; reconnect the load after the charge become normal.
B: Battery charge problem: Increase the solar panel power or change the battery.

* Phenomenon: Battery indicator LED is orange and Load indicator LED is green, the loads cannot work.
Reason: Over load or short-circuit causes the controller inner fuse cut off
Solution: 10-20 minutes after eliminated the malfunction, the fuse will automatically back to working.

Package includes:

1 * Solar Charge Controller
1 * User Manual

Hella Style 10 LED DRL Daytime Running Light Kit For BMW Z4
DNA Motoring HDSHC99SI41 Stainless Manifold DZ-HDS-HC99SI-41
Mix me 3037