Gadget Zone

BIB0007

GadgetZone (US Seller) AC 24-380V Output DC 3-32V Input Solid State Relay SSR-40 DA 40A, Triac Output

EAN: 6955899031052

Relay Control Module

The solid state relay made by us is the latest non-contact electronic switch with good on-off performance
Its input contact only requires tinny control current and can be compatible with integrated circuit of TL and CMOS. Etc.
The output return circuit adopts double-way controlled silicon or big power transistor to cut on or cut off the loading current
The optical couple is adopted between the input and output
Output current: 40A

Specification:

* Load voltage: 24-380VAC
* Control voltage: 3-32VDC
* Control current: DC 5-15mA
* Dielectric strength: 2500V AC
* Insulation Resistance: 1000M Omega/500VDC
* On voltage: no more than 1.5V
* One-off Time: no more than 10ms
* Off leakage Current: no more than 2mA
* The work instructions: LED
* Ambient temperature: -30 to +75 C

Cautions:

- It should be mounted near the window with good aeration condition or the occasion which cooling wind blow by if the working current of ssr less than 5A
- It should be fixed with a radiator if the working current of ssr more than 10A, and the abstraction-heat silicone grease should be used between the relay and radiator. It should be force to wind cooling if the surface temperature of the radiator approximate 60 C.
- Resistive load could not exceed 60% of rated current
- Inductive or capacitive load could not exceed 40% of rated current
- Electric machine load could out exceed 20% of rated current
- Proper radiator adapted to the working requirement of SSR should be equipped, the allowance should be widened when the load radiating condition is not so good, short-circuit load is not allowable
- Over current protection: over current and short circuit are the main reasons for permanent damage of output controllable silicon in the SSR, and using fast fuse and air switch is one of the methods for over current protection, fuse is also available for small capacity
- Over voltage protection: it could adopt parallel voltage-dependent resistance (MOV), the MOV area decides the absorption power, while its thickness decides the protective voltage value, generally, 471/10D voltage-dependent resistance for 220v series SSR, 681/10d Voltage-dependent resistance for 380v series SSR, 821/10D voltage-dependent resistance for 480V series SSR

Package includes:

1 * Solid State Relay

GENERAL MOTORS 26078078 SSHAFT
Top Line Topline Whl C605
Mix me 3793