Motor_pro

MP0204

Motor_pro Black 2 Pcs CNC Aluminum Wheels Valve Stems Cap 90 Degrees 11.3mm for Honda CBR

EAN: 0001959070380

UPC: 001959070380

Key Chains

Black
Fits: CBR 1000
Aluminum
NICE DESIGN
CNC

CNC Machined Billet Alumnium Valve Stems 11.3 mm Most Japanese bike uses 11.3mm tire valve stem, please check and red the following Material: 6061 T-6 billet aluminum Finish: CNC machined, anodized Application: Any bikes use 11.3mm tire valve stem. These valve stems will need a flat mounting spot of around 18mm valve stem on the wheel, make sure to check this, take a 18mm socket and place it over the valve stem you currently have while the valve stem sticks through the opening in the middle. If the flat region around the valve stem fits the 18mm socket, then these valve stems will fit your motorcycle Each order comes with a pair of two 90 degree aluminum valve stems. Features: -Angled for easy access to check tire pressure -They are reusable, no need to replace them like rubber valves with each tire change -Fixed to the wheel with a locking nut, can't bend, or be expelled from the wheel -The angled quill reduces the effect of centrifugal force, which tends to fling the valve core outwards in a conventional valve, leading to loss of pressure in tires. Assembly Instructions: Make sure the valve housing inside the rim is the correct type. Carefully clean the valve housing inside the rim (hole and surrounding area).Insert the valve in the rim housing, taking care not to damage the o-ring gasket. Attach the nut on the inside of the rim to the valve stem threaded body. Screw the nut fully-on and torque the nut to 7-10Nm*. Remount tire, infate tire to proper psi and verify no leak. *Make sure to torque the valve stems to the correct torque spec, excessive locking torque may crack, break or damage the valve stem. Fitment: All bikes use 11.3 mm valve stem Condition:100% Brand New Material: Aluminium Quantity: 1 set ( 2 units) Color: Shown as picture

Intro-Tech Coco Front Row Custom Floor Mats for Select Lincoln LS Models - Coconut Husks (Natural/Cream/Brown)
Wilwood Engineering 260 13366 Rebuild Cylinder 260-13366
Mix me 2867