TiAL Sport

002580 - MS Flange

TiAL Q Blow Off Valve - 2 psi (green) spring, Red Body, MS Flange

Blow Off Valves

Item ID: TIALBOVQ-2-RED-MS
Material (Spec): 6061 Aluminum Body, Mild Steel Flange

The TiAL Q Blow Off Valve is the first revision of the original TiAL BOV and it will bolt right up to any standard TiAL flange, so no re-welding is needed. This is a universal blow off valve for use on any turbo-charged or super-charged application (Paxton, Vortec, etc.). With a TiAL 50mm Blow Off Valve in place you can improve the long term durability and reliability of your turbocharger by preventing compressor surge during closed throttle and high vacuum conditions.

Features:
- 1.98 in (50.5mm) valve
- High Pressure Viton O-Ring
- Teflon-lubricated and hard anodize-coated Valve Stem and Guide
- Available w/ Black, Blue, Red, Silver or Purple Body
- Available w/ Aluminum, Mild Steel or Stainless Steel V-Band Weld Flange
- Can swap the bottom with the bottom of a Q BOV to make it a fully vent to atmosphere BOV in the future

What's Inside the Box?
- TiAL Q BOV Assembly
- TiAL Aluminum V-Band Clamp
- TiAL V-Band Weld Flange
- TiAL High Pressure O-Ring
- TiAL Banjo Type Air Fitting/Bolt - 10mm Hose Barb for quick actuator response

Choosing a Spring Rate:
- For Superchargers use 2 psi (0.14 bar), Green Spring
- For -8 to -11 inHg Engine Vacuum use 6 psi (0.41 bar), Black Spring
- For -12 to -15 inHg Engine Vacuum use 8 psi (0.55 bar), White Spring
- For -16 to -19 inHg Engine Vacuum use 10 psi (0.69 bar), Unpainted Spring
- For -20 to -21 inHg Engine Vacuum use 11 psi (0.76 bar), Yellow Spring
- For -22 to -23 inHg Engine Vacuum use 12 psi (0.83 bar), Brown Spring

Skyjacker F114024K-H Suspension Lift Kit w/Shock Hydro Shocks 4 in. Lift Class II Suspension Lift Kit w/Shock
THESTOPSHOP
Mix me 2413