Anvil Paints & Coatings

660001

Anvil ROOF-TEC Acrylic White Elastomeric Roof Coating - 1 Gallon

EAN: 0760428660018

UPC: 760428660018

Exhaust Coatings

Forms a Thick Rubber Like Blanket On Your Roof
Reduces Interior Temperatures
Brilliant White
Seals and Protects
Soap and Water Clean-Up while Wet

Anvil ROOF-TEC Acrylic Elastomeric Roof Coating is an acrylic latex roof coating formulated to provide superior bridging of the coating over seams and small separations. ROOF-TEC Acrylic exceeds performance of similar coatings of this type for adhesion and longevity. Its brilliant white finish not only beautified, but reflects up to 90% of sun rays lowering heat buildup and reducing air conditioning costs. Stays brighter longer for it contains a fungicide to resist mildew growth on the product film. Do not use on flat roofs. Roofs must have adequate pitch to allow water to run off. Apply with roller or airless sprayer. Airless pump set at 1,500 to 2,000 psi delivering 1 to 2 gallon per minute using spray tip of .026-.035. Allow 24 hours between coats. Apply only when temperatures are above 50 F and when humidity is below 95% for the next 24 rain free hours. If the roof is hot or day is windy, apply a mist-spray with water just before application to avoid sealer from drying too fast. Two or three (for warranty) coats at the rate of 60 sq. ft. per gallon are needed for proper sealing. Apply each coat perpendicular to the first coat. Do not thin product. Apply at package consistency.

Toyota Highlander '08-10 Base Limited / '10 SE / '08 SR5 Model Headlight Assembly Japan Built Rh US Passenger Side CAPA
FOUR SEASONS 13748 4
Mix me 698