Topline_autopart
tljy-blaz95-sm-001
Topline Autopart Smoke Housing Altezza Tail Lights Rear Lamp 1995-2004 S10 Blazer S15 Jimmy Envoy
Tail Light Assemblies
Application: 1995-2004 Chevy Blazer S10 Models, 1995-2004 GMC Jimmy Models, 1998-2000 GMC Envoy Models, 1996-2001 Oldsmobile Bravada Models
Altezza Tail Lights
New Design Altezza Sport Style
Color: Smoke Housing
Comes With A Complete Set ( Driver & Passenger Side )
- 100% Brand New In Stock
- Custom Designed To Fit Your Specific Application
- Direct Bolt-On Replacement
- Does NOT Include Installation Instruction
- Professional Installation Is Always Highly Recommended
* Technical Tips: Please Make Sure All Taillights Are Installed Properly, Sockets Are Tightly Fastened And All O-Rings Or Rubber Gaskets Are In Great Condition. Broken Or Loose O-Rings Or Rubber Gaskets On Your Factory Sockets Can Cause Moisture In Your Lights ( It Can Damage Your Light Bulb ). If You Happen To Have Moisture Buildup In Your Lights, Please Try The Following Solution. Simply Remove The Lights From The Vehicle And Set Out In The Sun Or In A Dry Area For At Least Few Hours. Wait Until The Moisture Has Fully Evaporated, And Reseal Around The Seams With A Clear Silicone Sealant On The Assembly And Replace Any Worn Down O-Rings Or Rubber Gaskets. This Should Alleviate The Condensation Issue.
** Installation Notes: Follow These Steps For An Easy Tail Light Replacement Process. Find A Path To The Back Of The Tail Light Housing. Every Car Is Different And Uses Either Screws To Hold The Tail Light In From The Outside, Or Has A Panel Inside The Car That Covers The Back Of The Tail Light. Remove Any Bolts Or Fasteners In Your Way. Once You See The Back Of The Tail Light, Unplug The Harness And Remove The Hold Down Screws. With Everything Out In The Open, You Are Free To Swap The Bad Bulb For A Good One. Or, Bolt In A New Set Of Led Tail Lights.
G-Max Replacement Shield for GM65 Full Dress Half Helmet - Clear - LG/2X G065006
Standard Motor Products VC 477 Control VC-477
Mix me 2055