Refined Cycle
TLM2
Refined Cycle TLM2-Triple Light Mount/Light Bar
Motorcycle Accessory Mounts
Allows you to mount many different light configurations including a 7/16" or 3/8" bottom mount custom, Harley or chopper headlight, with running lights and/or turn signals on most metric bikes. (Lights not included). See pictures below for several suggested uses and configurations. Mounting holes are for 1/4" or 6mm bolts. (not included)
TLM2 Fits Honda VTX1800 all models Honda VTX1300 all models except S and R Kawasaki VN1500 VN1600 Vulcan Mean Streak Kawasaki VN900 Vulcan 900 Classic 98 Honda Shadow Spirit 1100 VT1100/VT1100C Some Honda Shadow Spirit 750 Honda Valkyrie GL1500C Yamaha Dragstar 650 or other bikes within the measurement range below
If your bike is not on the above list, use these measurements and the Fitment picture to determine if the TLM1 fits your motorcycle... A must be 3" to 5.9" between centers AND B must be more than 6.75" AND D must be less than .7"
NOTE: If you would like help determining fit, email the following information... measurements A, B, C and D from the fitment picture above AND YEAR, MAKE, MODEL and SIZE.
On the underside of the TLM2 there are 2 holes drilled and counterbored that do not go all the way through. These are for a stock VTX headlight or any other 2 bolt headlight with mounting bolts about 3.93" or 100mm center to center. All you have to do is drill the holes the rest of the way through to use them. Mount, by sliding the head of a 6mm bolt into each side of the slots at the back. You can adjust the width of the mounting holes from 3" to 5.9" on center while keeping a clean look on the top.
Allows you to mount many different light configurations including a 7/16" or 3/8" bottom mount custom, Harley or chopper headlight, with running lights and/or turn signals on most metric bikes. (Lights not included). See pictures below for several suggested uses and configurations. Mounting holes are for 1/4" or 6mm bolts. (not included) TLM2 Fits Honda VTX1800 all models Honda VTX1300 all models except S and R Kawasaki VN1500 VN1600 Vulcan Mean Streak Kawasaki VN900 Vulcan 900 Classic 98 Honda Shadow Spirit 1100 VT1100/VT1100C Some Honda Shadow Spirit 750 Honda Valkyrie GL1500C Yamaha Dragstar 650 or other bikes within the measurement range below If your bike is not on the above list, use these measurements and the Fitment picture to determine if the TLM1 fits your motorcycle... A must be 3" to 5.9" between centers AND B must be more than 6.75" AND D must be less than .7" On the underside of the TLM2 there are 2 holes drilled and counterbored that do not go all the way through. These are for a stock VTX headlight or any other 2 bolt headlight with mounting bolts about 3.93" or 100mm center to center. All you have to do is drill the holes the rest of the way through to use them. Mount, by sliding the head of a 6mm bolt into each side of the slots at the back. You can adjust the width of the mounting holes from 3" to 5.9" on center while keeping a clean look on the top.
Lloyd Velourtex Carpeted Floor Mats for a 2004 Porsche 911 - Coupe|GT2 - (Dark Blue 2 Pc Front Mats) (AMS98204EKRZ2CK)
Premier Quality Products 33 153469 Shoulder 33-153469-1
Mix me 1520