Tork Tek

CIP040

Tork Tek CIP040 DODGE CUMMINS Cummins 24-Valve Injector Puller

Fuel Injectors

Pull Injectors Fast and Easy
Works on 98.5-02 Dodge Cummins 24-Valve engines

The CIP040 Cummins injector puller by Tork Tool is the newest tool for the Cummins 5.9. It was designed specifically for the 1998.5 to 2002 Cummins 24 valve. Now, you don't have to remove the rockers when you change to performance injectors. We looked at the current Cummins injector pullers that are on the market. The one thing that we didn't like was the use of a very long bolt. This prevented us from using a ratchet and deep socket to remove the injector. We chose to use a hardened set screw of the exact length. The beauty of this tool is it fits under the cowl for #5 and #6 injectors. This heavy duty tool was designed to make injector changing a simple project. The CIP040 features a thick wall tube and a custom washer that is machined to center on the tube. This automatically centers the tool over the injector body. We also took a look at the connector tube remover. The current remover has a screwdriver slot in the outer diameter. In our testing, we managed to get a few busted knuckles from the screwdriver slipping out of the groove. I think they designed it that way to save on material and machining costs. The CIP040 removal tool is machined from larger stock so you have a larger knurled head to assist in tube removal. We built it so you can bottom the tool in the head and the tube is easily removed. The remover acts like a jack screw. On really stuck tubes, the large head allows you to pry on back side of the head, and your screwdriver never slips off!

Intro-Tech Hexomat Cargo Area Custom Floor Mat for Select Nissan Quest Models - Rubber-like Compound (Tan)
OES Genuine Radius select Nissan W01331605472OES
Mix me 2739