Alpena

77223

Alpena 77223 White/White Motion LED Light

EAN: 0084902772234

UPC: 084902772234

Turn Signal Bulbs

Cut to size
Made with ultra-bright LEDs
Self-adhesive 3M foam tape
Water resistant
2 x 18 inch pieces per pack

Motion LED lights function with your driving lights and turn signals to create a professional look while being easy to install yourself. The turn signal function is a sequencing design so each LED will flash in sequence as you make a turn. Mount them around your headlights, mirrors or just about anywhere on your car. Motion LEDs are extremely flexible and can be cut to size. After rigorous testing and grading, the LEDs are chosen from a scale of 1-132. Made with high quality machinery using premium-grade materials, Alpena LEDs are durable and bright. INSTALLATION INSTRUCTIONS: 12 VOLT USE ONLY For best results, temperature at installation should be between 65-90 degrees F (18-32 degrees C) 1. Clean surface thoroughly with soap and water 2. Test fit into intended location 3. Carefully remove adhesive back and firmly press into intended location 4. Clear protective surface of LED strips are temperature sensitive and in cold weather the LED strip or installation surface should be warmed with a hair dryer. 5. Connect to 12volt fused power source. Connect sequencing turn signal to turn signal lead wire. Battery pack is for demonstration purposes only. Cut the wire from the LED kit to the battery pack and use the battery pack for other 12v applications. Discard in an environmentally safe manner. 6. Connect stripped wire to positive fused power and connect black wire to negative (ground) TIP: Can be connected to driving light. IF INSTALLING IN TIGHT LOCATION DO AS FOLLOWS: 1. Mix 1 cap full of baby shampoo and 1 liter (quart) of water. 2. Mix water and soap solution and mist intended install location 3. Remove adhesive backing 4. Thoroughly wet the adhesive with the solution and if possible the area where mounting is anticipated. 5. Press into position 6. Leave dry for 24 hours, before driving the vehicle. When CUT, re-seal ends by applying a drop of silicone sealant on exposed ends of LED strip to seal out moisture. NOT FOR USE IN EXTREME TEMPERATURES SUCH AS UNDERHOOD APPLICATIONS,FOR INTENDED USE ONLY

XtremeLite Premium High Beam Headlights 9003/HB2 6,000K Xenon HID Kits - 1993 Suzuki GSF400 Bandit
Honda 91272 733 931 Oil Seal 15X28X7 91272-733-931
Mix me 2682