Automotive Authority LLC®

VBC-12411

Automotive Authority LLC® 12V 12 Volt Marine Trolling Motor Battery Indicator Charge Status Power Meter

Decals

Never let your electric motor run out of power again. This battery indicator is specifically designed for battery powered equipment to monitor the charge status of the batteries charge.
Operating Voltage: 12V - 24V
Installation Instructions Provided in the Product Description

Connections: The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected). "C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. Dimensions: Overall: Width 2 1/16" ; Height 1 1/4" Hole cutout - 1 3/8" wide by 7/8" high Depth Behind front meter flange to end of mounting screws - 1 1/8 inches

SPEC Clutch SA342 Spec Stage 2 Clutch Kit Acura Vigor 1992-1994
Roadmaster RBK4 Bracket Kit
Mix me 273