Cimtek

70059

Cim-Tek Centurion 300-HS10II Hydrosorb Filter, 10 Micron Gas

EAN: 0852664600740

UPC: 852664600740

Filters

The 300-HS10II Hydrosorb is recommended for gasoline and diesel fuels
Has a maximum flow is 15 gpm/56 lpm and maximum working pressure of 50 psi/3.4 bar
300 Hydrosorb Spin-on Filters are recognized by Underwriters Laboratories
Available with aluminum or cast-iron filter adaptors for standard applications

The maximum flow is 15 gpm/56 lpm. The maximum working pressure is 50 psi/3.4 bar. The maximum differential pressure is 25 psi/1.7 bar. The HYDROSORB® 300 Series Spin-on Filters have a standard 3/4 in. opening required for most service station pumps and dispensers. The 300HS-1 0 Type 2, a nominal 1 0 micron, is recommended for gasoline and diesel fuels. The 300HS-30 Type 2, a nominal 30 micron, may be preferred for heavier distillates such as diesel fuel and fuel oils. The water-holding capacity for the 300HS-10 Type2 and the 300HS-30 Type 2 is 130 milliliters or 4.5 ounces before flow restriction occurs. The 300 HYDROSORB® Spin-on Filters are recognized by Underwriters Laboratories for use on service station pumps and dispensers. The 300 HYDROSORB® Spin-on Filters are available with a selection of aluminum and cast-iron filter adaptors for standard applications.

Autospecialty SW1514 Rear Disc Pad Sensor Wire
Diesel Intake Elbow 75 5047 76 1004
Mix me 556