Auto Direct Save

RGB KIT

10m 32ft Solid Strand RGB LED Strip for Limo Party Bus Installation 12v or 110v

EAN: 0617215963329

UPC: 617215963329

Neon Light Kits

10 Meters one strand of RGB LED Strip that can be cut every 3 inches. 3M Adhesive backing tape for secure and easy application to most surfaces such as tables or walls.
1 x Controller Box, 1 x Remote Control IR, 1 x 12V AC/DC Power Supply
It is capable of displaying many colors because it features a setting that allows it slowly or fast, change the brightness of its red, green, blue LED, creating a million color effect.
Is this for car or motorcycle? Its designed for both cars and motorcycles. For cars, included is a cigar adapter plug. For bikes, you must cut this cigar adapter plug off and wire it in to your battery or any 12V power source on your bike. Remember, it has a wireless remote control, so no worries, just shut it off once your done with the remote.
Why should I buy your kit vs the others on Amazon First, our kit uses some of the brightest LED on the market. Second, you can control your lights remotely without the purchase of anything else. Third, you can do tons of different patterns and colors with our remote control. Fourth it includes the power supply to power the LED strip controller box. Simple wire (-minus to the controller box black wire and +plus to the controller box black/white wire. If you are confused, the controller box is the white little box.

Features: On/Off/Fading/Flashing with rainbow effect (slow color change) 16 Color Change 3M Tape on back Water proof 5050 SMD High Power LEDs (30 in each Meter) 300 Total Brightest on the market! Fast shipping from the USA! Can be extended with another purchase of 10M roll strips. One solid strand of 10M - No its not 2x 5M like other sellers! Is it water proof? The LED strips are water proof, but the controller box is not. So if you mount the tubes in a area that can get some water, you must protect the controller box. Can this be used in my home? Yes, simple connect a few wires and make connection from power supply to controller box (provided) and you have light! Instructions! Important please read after you buy: Step 1: Remove parts and lay on table to get a visual of what goes where. Step 2: Remove remote control and remove the plastic battery protector strip. Step 3: Connect Power supply output wires to input wires of controller box. (-minus to the controller box black wire and +plus to the controller box black/white wire. Step 4: Use electrical tape to seal the connection. Step 5: Connect controller box to LED strips. Provided on one end of the LED strip should be a 4 PIN connector. You can plug the connector from controller box TWO WAYS. If you connect it the wrong way the lights won't work, flip if they do not work. Step 6: Test remote function and mount your strips carefully without creating too much of a bend that could damage internal wires of the strip. Quality? We have tested our demo unit on for 2 months straight. No joke. The light is still runing. So we ensure quality. Of course if you have a failure we will glady help with a replacement, but this is very rare!

73-91 GMC C/K 1500 2500 3500 Truck Coverking Genuine Leather Custom Fit Seat Covers FRONT ROW
FLYPIG Petcock SUZUKI TS100 Motorcycle AMZ-LS028-TS250
Mix me 3084