MotorCycle Solutions LLC

MCS-012

Honda Caliper Piston, CB750F GL1000 LTD - Stainless Steel MCS-012

EAN: 0757901765841

UPC: 757901765841

Calipers

Manufactured out of 304 stainless steel that is highly resistant to corrosion or oxidation
Made in the USA using the latest computerized CNC technology lathe machines.
Fits late 1970s Hondas (See description below.)

New stainless steel caliper piston for the rear brake calipers listed below. These pistons are machined to the exact dimensions and surface finish of the original part, but are manufactured out of 304 stainless steel that is highly resistant to corrosion or oxidation. The original piston that Honda supplied was machined from cast iron with a thin plating of chrome. With the Honda-made piston, you will get corrosion on the piston in a short period of time, which leads to brake fluid leaking past the sealing ring. This will lead to caliper binding and the need to rebuild your brake caliper. These pistons do not deteriorate from contact with the moisture that sooner or later gets into your hydraulic brake system. They are designed for a lifetime of use and will never corrode or pit even if your bike sits for an extended period of time. Front 2 means: two pistons of this type for the front wheel, rear 1 means: one piston of this type for the rear wheel, front + rear 3 means: the same pistons for front and rear brakes, 3 together of this type. For a complete rebuild of your brake system you may need more than one piston. CB750F SS K0 (76) rear 2 GL1000 (75-77) rear 2 GL1000 LTD (all) rear 2 This piston has the following dimensions: outer diameter 38.10mm[=1.5inch or 1 1/2"], height 23.5mm[=0.925inch or 15/16"]

Hepu Water Pump
DNJ Engine Components EV245 Valves
Mix me 2778