Dashboss

FP-0100

Pressure Transducer 0-100 PSI for Dashboss

EAN: 0799928995047

UPC: 799928995047

Fuel Injection

0-100 PSI range
0-5 Volt input/output (must use 5 VOLT SOURCE INPUT)
Fuel, oil, air, water tolerant
YOU WILL NEED THE DASHBOSS CONNECTION KIT FOR EASY HOOK UP IF YOU WANT TO USE IT WITH DASHBOSS (SOLD SEPARATELY)
LINEAR ANALOG SENSOR (0.5v - 4.5v)

This is an industrial style transducer for use with oil, fuel, gasoline, diesel, or even air! Specifications:

* Input: 0-100 psi.

* Output: 0.5V - 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.

* Works for oil, fuel or air pressure. Can be used in oil tank, gas tank, etc.

* Accuracy: within 2% of reading (full scale).

* Thread: 1/8" NPT

* Wiring connector: water sealed quick disconnect.

* Mating connector is included.

* Wiring: Red: +5V. Black (yellow): ground. Blue (green): signal output.

* Working Temp: -20C - 125C (-4F - 260F)

* Over pressure: more than 150% of full scale (150+PSI)

* Response time: 50ms

* Current draw: < 4ma

* Slope = 25 and y-intercept = -12.5

This sensor MUST BE POWERED BY 5 VOLTS (NOT 12!) You can usually find a 5 Volt sensor reference for other OEM sensors on the vehicle.

TO USE WITH DASHBOSS YOU WILL NEED THE DASHBOSS CONNECTION KIT (SOLD SEPARATELY)

You may wish to purchase the FUEL PRESSURE ADAPTER (http://www.amazon.com/gp/product/B00FMY9MUI) if you wish to use it on a PowerStroke Diesel

*** NOW WITH STAINLESS STEEL BODY!

DashBoss Connection Kit
Ford Powerstroke 6.0 Fuel Pressure Sender Adapter
Edge Products 98605 EAS Universal Sensor Input
Ford Powerstroke 6.0 Fuel Pressure Sender Relocation Kit
(4) 1.25 Thick 4x156 ATV Wheel Spacers with 3/8 Studs/Nuts for many Polaris & Kawasaki: Outlaw (Front Only) Predator Ranger RZR Sportsman XP Lakota Mojave Tecate (4/156) Silver
Genuine Resistor 1KO959263A Volkswagen SCIROCCO CARE263A-1
Mix me 4583