Fiberglass Evercoat
100425
Evercoat Metal Glaze Ultra 30 Ounce 100425
EAN: 0023289004255
UPC: 023289004255
Putty
New
METAL GLAZE Ultra is the world's best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks products to improve flowout. Formulated with ZNX 7 for improved adhesion.
APPROVED SUBSTRATES:
- Sanded Body filler
- Steel
- Galvanized Steel
- E-Coat
- Aluminum
- Rigid to Semi-rigid Thermoset Plastics
- SMC
- Fiberglass (cosmetic repairs only)
- Cured sanded 2K primer surfaces
- Sanded OEM paint
NOTE: For flexible plastics, use POLY-FLEXTM Flexible Glazing Putty.
PREPARATION:
- Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing.
- Use 80-180 grit to remove or scuff the paint and featheredge.
MIXING:
- Place the desired amount of material on a clean, non-fibrous surface. Knead the cream hardener before use.
- Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4" (10 cm) diameter puddle. Puddles larger than 4" in diameter will require additional hardener.
- Mix thoroughly until uniform color is achieved.
Custom Shop Pack Of 12 each 32 Ounce Paint Mix Cups with calibrated mixing ratios on side of cup
3M 357 Bondo Spreader
Dynatron 358 Spreader
DURA-GOLD 80 Grit 2-3/4 PSA Abarasive Roll Longboard Sandpaper
Dynatron 366 Mixing Board
Subaru 45131 SA000, Engine Cooling Fan Motor
Raybestos H2638 Rear Left Adjusting
Mix me 2968