Rough Country

5097

Rough Country - 5097.1 - CV Rear Drive Shaft for SA 3.5-6-inch or LA 2.5-6-inch Lifts for Jeep: 07-11 Wrangler JK 4WD

Categories

Features: Collapsed Measurement: 23875-inches; Extended Measurement: 27375-inches; After lifting your Jeep JK Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft; Includes Brute Force Red seals; Includes better quality CV joints; Shaft strength is twice as strong as the factory equipped drive shaft
Fits: 2007-2011 4WD Jeep JK Wrangler
Notes: Does NOT fit 4-door (Unlimited) models.; Recommended on models with 3.5in - 6in of lift.
Kit Contents: Extended CV drive shaft, Flanges/Yokes, Hardware
Specs: SKU: 5097.1; Est. Install Time: 2-3 hours

This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.

Rough Country - 5096.1 - CV Front Drive Shaft (Dana 30 Front Axle Models) for SA 3.5-6-inch or LA 2.5-6-inch Lifts for Jeep: 07-11 Wrangler JK 4WD, 07-11 Wrangler Unlimited JK 4WD
Rough Country - 1118 - Front Track Bar Bracket for 3.5-6-inch Lifts for Jeep: 07-18 Wrangler JK 4WD, 07-18 Wrangler Unlimited JK 4WD/2WD
Fleetguard AF1822 - AIR FILTER
Motorcraft SW 6454 Headlamp Switch SW-6454
Mix me 1739