McGaughys

93023

McGaughys Deluxe 4/6 Lowering Suspension Kit 17 + Wheels 1/2 Ton Truck 2WD 93023

Armature

Chevy GMC Truck 1/2 Ton 1999 - 2000 2WD X/Quad Cab
McGaughys Part #99SE is recommended. They are not required but they make a big difference in the ride quality. The shock extenders relocate the shock angle to put it back to its original angle.
Must use 17" or larger wheels in order to use these spindles. Factory 17" wheels will work with a slight modification, aftermarket cast 17" wheels likely will NOT work. If your truck has a two piece drive line, you may need a carrier bearing relocator.
These coil springs were engineered for a truck with a V-8 Engine. If coils are installed on a 6 Cylinder truck then the full drop will not be achieved and the rear will sit lower than the front.
Includes: Spindles, Coil Springs, Flip Kit, Flip Plates, Flip Pads, C-Notch Plates, Bump Stops and Bolt Kits

McGaughys takes pride in their reputation for bolt-on installations, and they make sure that McGaughys suspension lowering kit components work hand-in-hand with necessary factory components. McGaughys suspension lowering components are made so that the average person can do the installation in their garage without any major modifications.

PIAA 74110 1100X Mounting Bracket for BMW F650/800GS
AP Exhaust 8233 Hanger
Mix me 3218