MrZAccessories

WG-5500

Wolfgang Deep Gloss Paint Sealant

EAN: 0800103462220

UPC: 800103462220

Cleaning Kits

paint-friendly, water-based formula
non-toxic and surface-friendly
ease of application
can be applied by hand or with an orbital polisher
A glossy, rich, liquid shimmer that leaps off the paint surface!

Directions:

1. Wash your vehicle. Dry completely.
2. For the best results, use a paint cleanser like Wolfgang Paintwork Polish Enhancer to remove mild imperfections and wax build-up.
3. Apply Wolfgang Deep Gloss Paint Sealant 3.0 over the entire vehicle either by hand or with a machine. If applying by hand, use a yellow foam applicator. If applying by machine, use a blue finessing pad. Using a dual action polisher, set the maximum speed to 4.5 and work in overlapping sections until the entire vehicle is covered. Apply a very thin, even coat.
4. Once the vehicle is covered, wait 30-45 minutes before buffing. Use a microfiber towel or a microfiber bonnet on your polisher.
5. This product is moisture-sensitive. In order to achieve a slick, durable finish, Wolfgang Deep Gloss Paint Sealant 3.0 must cure for at least 12 hours before being exposed to moisture. Do not apply sealant before dusk because dew will interfere with the adhesion to the paint. Park your vehicle in a garage or under a shelter while it is curing, if possible.
6. Use Wolfgang Deep Gloss Spritz Sealant to boost the gloss and protection any time with even more reflective Super Polymers.

16 oz.
Wolfgang Deep Gloss Paint Sealant 3.0 will alter your perceptions of paint sealants forever. The glossy, liquid-like shimmer enhances all types and colors of paint. No other synthetic wax or paint sealant gives your vehicle the gloss, the depth, and the protection of Wolfgang Deep Gloss Paint Sealant 3.0. Now with fortified polymer technology, Wolfgang Deep Gloss Paint Sealant 3.0 is simply the best paint sealant you'll ever use.

Tech notes: Wolfgang Deep Gloss Paint Sealant 3.0 is a water-based, oxygen activated paint sealant. After buffing off the sealant, the remaining coating needs to cure for 12 hours in dry conditions to fully bond to the paint. Exposure to moisture during this time will drown the polymers. For the best results, allow 12 hours of curing time

Wolfgang Polish Enhancer
P21S Concours Carnauba Wax 6.2 ounce
Wolfgang 8 oz. Swirl Remover Combo
Wolfgang Deep Gloss Spritz Sealant 16oz
Wolfgang Exterior Trim Sealant 16 Oz
Ferrea S10057 Set of Sport Compact Valve Springs
Infiniti 16630 1LA0A Mechanical Fuel Pump 16630-1LA0A
Mix me 2949