Elkhart

6803

Elkhart (06803) Flair-It Male Elbow Fitting

EAN: 0742979068031

UPC: 742979068031

SKU: 15002803

Pipe Fittings

For hot and cold potable water fittings (150 degrees at 100 psi), Flair-It Male Elbow Fitting 1/2 inch Male Pipe Thread x 1/2 inch Flare
Squarely cut end of tubing, slide nut over tubing
Firmly press tubing onto the flare of the fitting
Slide the nut to the threads and hand tighten securely onto the fitting
Nuts are included

Flair-It Fittings Flared - Cone and Nut Fittings Applications For Hot and Cold Potable Water Fittings - For hot and cold potable water fittings (150 degrees at 100 psi). Squarely cut end of tubing, slide nut over tubing. Firmly press tubing onto the flare of the fitting. Slide the nut to the threads and hand tighten securely onto the fitting. Turn 1/4 more turn with a wrench if necessary. Do not use any 2 inch pipe dopes, sealants, Teflon tape or other chemical on Flair-It connections. However, Teflon tape should be used on male pipe threads when connecting to female threads. When connecting to brass, galvanized steel or CPVC, use a male Flair-It fitting instead of a female fitting. When connecting Flair-It fittings to a water heater in a mobile home, we recommend using a 1/2 inch flex copper connector off of the water heater. From a flex connector to polybutylene, use a Flair-It male adapter. Do not use in a closed loop system. Joints should not be made under concrete. Nuts are included. Flair-It Male Elbow Fitting 1/2 inch Male Pipe Thread x 1/2 inch Flare.

Quality - High Beam HID Xenon Headlight AC Conversion Kit by Kensun - 9005 (HB3) - 8000K
Wells SU6667 Valve Temperature Sensor
Mix me 779