Hell Bent Steel

111-250-001

Hell Bent Steel Anti-Sway Bar Drop Brackets (PN:111-250-001)

EAN: 0639767822817

UPC: 639767822817

Body Lift Kits

Dodge Ram Heavy-Duty Anti-Sway Bar Drop Bracket for all solid axle 4X4 models. Fits 1994-2012 Dodge Ram 2500/3500 4WD, 1994-2001 Dodge Ram 1500 4WD, and 2006-2008 Dodge Ram 1500 MegaCab 4WD.
Complete your truck's leveling/lift with the Hell Bent Steel Dodge Ram Anti-Sway Bar Drop Bracket Kit. This kit is recommended for vehicles with 2.5 inch lifts or larger. Adjusts and corrects your sway bar's mounting location for body-roll and sway control. This kit is not necessary for less than 2.5 inch of lift.
HBS builds your Dodge Ram anti-sway bar drop brackets from premium 3/16 inch thick steel. Our heavy-duty brackets are finished with an anti-corrosive powder coating. No drilling needed- HBS Dodge Ram Anti-Sway Bar Drop Brackets bolt right into factory frame holes.
Built with pride in the USA! As with all HBS products, the Dodge Ram anti-sway bar drop brackets are covered with a lifetime warranty.

If your Dodge Ram truck has a 2.5 inch or greater lift and equipped with a factory front anti-sway bar, you will want this drop bracket kit to return your anti-sway bar to the proper angle. It is important to maintain the proper angle of the anti-sway bar to minimize wear on the anti-sway bar end links. The goal of the drop brackets is to keep the sway bar end-links in their stock (vertical) position. Doing so will avoid any excess wear on the end-link bushings and extend the life of the end links. After your Dodge Ram leveling kit is installed, check the angle position of the end-links. If the end-links are leaning either forward or backward then use the drop brackets to adjust the end-links to the vertical position. If the end-links are vertical without the drop brackets, then you do not need to install the drop brackets. Installing drop brackets when they are not needed can cause excessive wear in the end-link bushings and reduce the life of the end links. These brackets are intended to be used in combination with the HBS Dodge Ram 2.5 inch Leveling kits. NOTE: the drop brackets will not fit the 1500 IFS models.

Moog K7353 Sway Bar Bushing Kit
Bilstein BE56681H8 Shock Absorber
Hell Bent Steel Dodge Ram 2.5 Leveling/Lift Kit (PN:110-250-001)
BD Diesel 1032050 Sway Bar End Link Kit Dual Pivot Design Incl. Cast Line/U-Bracket/Bushing Kit/Bolts/Nuts/Washers Sway Bar End Link Kit
Supreme Suspensions - 3 Front Lift Leveling Kit Lifting 4wd 3 Inch Dodge Ram 3500 4x4
Durafit Seat Covers, F224-V7- Ford F250-F550 Rear Solid Bench Seat Covers In Gray Velour
POTAUTO Filter Replacement compatible WRANGLER MAP 2010W
Mix me 4692