HouseofKolor

KD 3003

1Qt Kit - House Kolor - Yellow DTS Epoxy Surfacer Sealer KD3003

EAN: 0806298451629

UPC: 806298451629

Body Paint

Resists cracking
Cures for sanding and finishing in 60-90minutes at 70oF
Prevents plastic filler staining or bleed through
Does not stain, shrink, or swell from sand scratches

GENERAL INFORMATION:
KD3000 Series Kustom DTS (direct to substrate) Foundation Surfacer/Sealer is formulated with a hybrid of epoxy and acrylic
polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These DTS
surfacer/sealers emit very low amounts of Volatile Organic Compounds (VOCs), Hazardous Air Polluting Solvents (HAPS), and
contain no isocyanates. The KD3000 Series DTS surfacer/sealers may be applied to the existing OEM finish, bare steel, aluminium,
fibreglass, galvanized surfaces, and various plastics. Its tenacious adhesion, hi-build, excellent durability, and water and corrosion
resistance make it a logical choice for the basis of a long lasting custom paint job.

KD3000 Series Kustom DTS Foundation Surfacer/Sealer:
• Resists cracking
• Cures for sanding and finishing in 60-90minutes at 70oF
• Prevents plastic filler staining or bleed through
• Does not stain, shrink, or swell from sand scratches

Container: 1 Quart Kit (32oz Primer + 8oz Activator)

More Information: style="font-style: italic;">Tech Data Sheet:



SUBSTRATE:
• OEM Finishes
• Bare Steel
• Bare Aluminum
• Bare Fiberglass
• Galvanized Surfacers
• Various Plastics (Testing For Adhesion Is Recommended)
• Body Fillers

COMPONENTS:
KD3000 series of primers were designed to be intermixed with each other to tint the primer closest to the base coat color being
applied. This is important in reducing the number of coats of base coat also in the event the finish is chipped or scratched the damage
area won't be as obvious. (Refer to mixing chart for formulas)
• KD3000 - Med...

Lund 15064801 Floor Covering, Black
Lexus 77300 33070 Fuel Tank Cap 7730033070
Mix me 4182