D-Rings Tiedown Attachments - 04 Pack

40215-10-04B

Surface Mount TieDowns D-Ring 4000 Tiedown w/ Backing Plate 4 Pack

Ratcheting

4,000 lb. rating (straight pull). WLL is 1,333 lb. capacity* 1/4" drain hole.
This attachment measures 3-3/4" wide x 5" long. The 1/4" diameter ring measures 1-1/2" wide x 2" long.
The "top cap" is 11 gauge or 1/8" thick. The tiedown attachment is secured with one 3/8" diameter mounting hole and a 1/4" rivet.
The galvanized backing plate measures 6" x 6" Thickness is 10 gauge ( 1/8").
Multiple hole configurations for use with 8 varieties of attachments. Each plate weighs 1.05 lbs.

This listing is for FOUR (4) tie down attachments and backing plates. Purchased individually @ $9.40 each, the cost would be $37.60 - therefore you SAVE $5.65. The strong surface mont d-ring has a 4,000 lb. vertical pull weight rating*. The ring and backing plate are zinc coated to inhibit corrosion. These surface mount D-rings are also available without Backing Plates. The backing plate is used for support under the floor when installing the attachments, and prevents the bolts from pulling through. *RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.

Purple Bubble Shift Knob For Automatic Throw Gear Shifter Selector 6 8X1.25
Hitachi ABV0072 Air Bypass Valve
Mix me 1599