SP Performance Rotors

D54-078-3

1999 Ford F250 4WD SD (DRW W/4WABS, 3.73, 4.10, 4.30 Gear Ratio, From 3/22/1999 13 1/64 Rotors) Front Diamond Slot Brake Rotors

Rotors

1 Set of Left and Right Front Rotors For: 1999 Ford F250 4WD SD (DRW With 4 Wheel ABS, 3.73, 4.10, 4.30 Gear Ratio, From 3/22/1999 13 1/64" Rotors) Front
Finished with SP Performance Exclusive ZRC Gray Coating to protection against corrosion.
Reduced Fade - Increased bite - Improved braking - Increased cooling - Increased Safety and Reliability
Slots Wipe The Brake Pads - Expel Gasses - Greatly Reduce Stopping Distance
Direct Bolt-On No Modifications Necessary ------ Note: Rotor Image Is Not Vehicle Specific

The SP Performance Diamond Slotted Brake Rotors are a unique design in slotted technology. This slotted design was created to maximize the out-gassing while maintaining the structural integrity of the rotor. The series of slots and diamond slots "wipes" the surface of the pad, reducing gases which build up and cause brakes to fade at higher temperatures. The slots and diamonds are machined to the minimum rotor thickness to insure rotor strength and integrity. The appearance of this design is highly desirable to the performance enthusiast wanting a new look to their vehicle.

Each rotor is coated with SP's flat gray ZRC. It provides long-lasting protection against corrosion in the most hostile salt-water environments. After being applied, ZRC provides the highest level of galvanic protection. The film of ZRC is conductive. After the coating heats up during use, it bonds permanently to the metal surface. It will not allow the metal to corrode, even when the surface is scratched.

Note: Please check Title and Product Features to verify the vehicle application to make sure these rotors will fit your vehicle before ordering.

1 3/4 (45mm) HPS High Temp Reinforced Silicone Hump Coupler Hose 4 4-ply Black
Mercedes Benz Sprinter Mahle Original OX380D
Mix me 3487