Peak
PEK12035
Peak PEK12035 10W30 Full Synthetic Motor Oil - 1 Quart Bottle, (Pack of 6)
EAN: 0074804120356
UPC: 074804120356
Motor Oils
Exceeds ILSAC GF-5 energy conserving performance standards
Protects against high temperature deposits that can damage your engine
Reduces friction and wear at engine start-up in cold weather
Maximum protection against viscosity breakdown
Meets the highest U.S. standards for automotive engine wear protection
Peak Performance Full Synthetic Motor Oils are formulated with high quality synthetic base stocks and are fortified with an advanced additive technology to provide maximum protection for today's modern engines. Peak Performance Full Synthetic Motor Oils meet most warranty requirements for U.S., European and Japanese cars and light trucks with gasoline and gasoline turbo charged engines where API SN, SM, SL, SJ or SH are specified. Exceeds ILSAC GF-5 energy conserving performance standards. Benefits include: Protection against high temperature deposits that can damage your engine, reduced friction and wear at engine start-up in cold weather, maximum protection against viscosity breakdown, protects engines under demanding stop and go driving conditions and protects against the formation of sludge and varnish deposits on engine parts. Meets the highest U.S. standards for automotive engine wear protection. Peak Performance Full Synthetic Motor Oils are recommended for use in all gasoline engines, including turbocharged, in passenger cars, light-duty trucks, vans and sport utility vehicles. Peak Performance Full Synthetic Motor Oil SAE 0W-20, 5W-20, 5W-30 and 10W-30 exceed the demanding requirements of the International Lubricant Standardization and Approval Committee (ILSAC) GF-5. GF-5 is the latest standard for passenger car, van, light-duty truck and sport utility engine oils. It also exceeds API SN service classification requirements. Viscosity recommendations vary according to temperature and engine manufacturer. Peak Performance Full Synthetic Motor Oils are not recommended for use in diesel engines.
Motor oil is made from crude oil and is used to lubricate, clean, and cool engines. Types of motor oil include conventional, synthetic, diesel, bio-based, hybrid (blends of conventional and synthetic), and recycled oils. Motor oil varies in weight and viscosity, as well as additives that some manufacturers add to the oil during the refining process. A numerical code system created by the Society of Automotive Engineers (SAE) grades motor oils according to viscosity--the higher the number between 0 and 60, the more viscous (thicker) the oil is. Most consumer motor oils are graded by two numbers, with the first number indicating cold weather (Winter or "W") performance.
SAE 10W-30
This oil has a weight of SAE 10W-30, meaning it has an SAE viscosity rating of 10 in cold temperatures and a rating of 30 at normal operating temperature. Always check your vehicle's owner's manual to verify that this is the correct weight of motor oil for your vehicle.
Full Synthetic Oil
This oil is a full synthetic oil, meaning crude oil is not used in making it. Synthetic oil can be used in vehicle engines instead of motor oils refined from crude oil, and often provides superior mechanical performance over traditional motor oil, including increased gas mileage and reduced engine wear at extreme temperatures. Its complex method of production means it can often cost more than conventional motor oil.
ITM Engine Components 09-00587 Full Set
CARDONE
Mix me 3115