AEM

30-2012

AEM 30-2012 Water / Coolant / Oil Temperature Sensor Kit

EAN: 0840879021795

UPC: 840879021795

Fuel Injection

One wire to sensor ground and one wire to sensor signal
Wire strip length is 0.175 inches to 0.200 inches
Thread size: 1/8 inches
Operating temperature: sensor tip -40C to 200C, connector -40C to 150C

This product has sensor performance specifications with accuracy of more than 2 degree centigrade / 3.6 degree Fahrenheit and operating temperature of - 40 Celsius to 200 Celsius / -40 Fahrenheit to 392 Fahrenheit. The dissipation constant is 12 megawatt per degree centigrade and the ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the Thermistor. The test medium is silicone oil and thermal time constant is 10 sec. The time required for the sensor to achieve 63.2 per cent of its steady state value when subjected to a step change in ambient temperature [Tc= (Tf-Ti) x63.2%+Ti]. Sensor body material used is brass, thread: 1/8 inches -27 PTF, hex size is 1/2 inches, installation torque: 13.5Nm / 10 feet-pounds, weight of 12.2 grams, supply current: 5 Volt DC, electric termination: connector includes mating connector, pins and pin lock.

AEM 30-2131-100 100 PSIG Brass Sensor Kit
AEM 30-2131-150 150 PSIG Brass Sensor Kit
AEM 30-2010 Air Inlet Temperature Sensor Kit
Autex Pressure transducer/sender/sensor 100 psi stainless steel for oil, fuel, air, water
Equus 9848 Oil Pressure and Electronic Temperature Metric Adapter Kit
CADILLAC Coupe De Ville (2 dr) '71-'76 Front Protective Floor Protect-A-Mat Mat
ACCEL 8122 Distributor Cap Rotor
Mix me 1158