Dorman

911-105

Dorman 911-105 Vapor Canister Vent Valve

EAN: 0019495291923

UPC: 019495291923

SKU: RB911105.13402

Vapor Canisters

Used to seal the EVAP canister during startup system check
The ability to seal the vent is necessary for the on board diagnosis of the evaporative emission control system
Includes hardware for complete installation

The vapor canister vent valve is located on the EVAP canister and is used to seal the canister during startup system check. The solenoid responds to signals from the ECM. When the ECM sends an on signal, the coil in the vent valve is energized. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of the evaporative emission control system. The vent valve is used only for diagnosis and usually remains opened. Vent valves are primarily replaced due to reasons like electronic solenoid failing due to water intrusion, it contaminates entering the system due to an O-ring failure causing the valve to stick. It is often the solenoid will not engage or it will engage but the pintle will not move its complete required path of travel. Its failure causes the check engine light to set with EVAP Code System that is small leak diagnosis.

Standard Motor Products CP596 Canister Purge Solenoid
Standard Motor Products EGV1055 EGR Valve
A-Premium Hood Lift Supports Shock Struts for Ford Explorer 2002-2010 2-PC Set
Motorcraft FC-1058 Fuel Tank Cap
Dorman 902-860 Thermostat Housing Kit
Tour Master Aquatherm Liner for Draft Jacket
ALBA RACING
Mix me 3032