Castrol
06248
Castrol 06248 EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart, 6 Pack
Motor Oils
Advanced premium full synthetic motor oil to offer strength under extreme pressure
Titanium strong for maximum engine performance
Reduces metal-to-metal contact across a range of different driving speeds
Protects the engine for the entire drain interval even under extreme pressure
Decreases engine deposit formation to help maximize engine response
Castrol EDGE is Castrol’s most advanced engine oil. It is a premium full synthetic oil that is designed for consumers who demand the best performance from their cars. Castrol EDGE is recommended by leading car manufacturers. Castrol EDGE is engineered with fluid titanium technology that physically changes the way the oil behaves under pressure. Castrol EDGE is 3X stronger against viscosity breakdown than the leading full synthetic and conventional motor oils* As a result of increased demand for performance and fuel economy, pressures in today’s engines have almost doubled over the last three decades. Greater pressure means more stress for the oil and the potential for more friction. As metal to metal contact increases, it causes wear and reduces performance. Underneath the hood, the pressure can reach 10 tons per square centimeter. That’s like five cars resting on a high heel relying only on a micro thin layer of oil for protection. So you need a strong oil to reduce friction, and to help increase horsepower and fuel economy. To combat the increased pressures faced in today’s engines, Castrol EDGE is engineered with fluid titanium technology that physically changes the way the oil behaves under pressure. Castrol’s patented titanium technology provides documented performance in friction reduction, anti-wear and deposit control protection. The titanium-based technology ensures performance and strength. Castrol EDGE is 3X stronger against viscosity breakdown than the leading premium full synthetic and conventional oils*. *Tested in the ASTM D6278 test in the 5W-30 viscosity grade
Motor oil is made from crude oil and is used to lubricate, clean, and cool engines. Types of motor oil include conventional, synthetic, diesel, bio-based, hybrid (blends of conventional and synthetic), and recycled oils. Motor oil varies in weight and viscosity, as well as additives that some manufacturers add to the oil during the refining process. A numerical code system created by the Society of Automotive Engineers (SAE) grades motor oils according to viscosity--the higher the number between 0 and 60, the more viscous (thicker) the oil is. Most consumer motor oils are graded by two numbers, with the first number indicating cold weather (Winter or "W") performance.
SAE 5W-30
This oil has a weight of SAE 5W-30, meaning it has an SAE viscosity rating of 5 in cold temperatures and a rating of 30 at normal operating temperature. Always check your vehicle's owner's manual to verify that this is the correct weight of motor oil for your vehicle.
Full Synthetic Oil
This oil is a full synthetic oil, meaning crude oil is not used in making it. Synthetic oil can be used in vehicle engines instead of motor oils refined from crude oil, and often provides superior mechanical performance over traditional motor oil, including increased gas mileage and reduced engine wear at extreme temperatures. Its complex method of production means it can often cost more than conventional motor oil.
Castrol 03084 EDGE 5W-30 Advanced Full Synthetic Motor Oil, 5 Quart
Mann-Filter HU 816 X Metal-Free Oil Filter
Castrol 06128 EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 quart
BMW (11 42 7 566 327) Oil Filter Element Set