40-200-008

Banjo Bolt for Low Profile oil inlet - GT BB Turbos

Hoses

Special oil inlet banjo bolt for low profile use on GT Ball Bearing turbos such as GT25R/GT28R/GT28RS/GT2871R/GT3071R/GT30R/GT35R (also GT15).
Works with most 12mm banjos on the market or can be used with P/N: 40-200-005 12mm to -4AN male banjo fitting if used with (3) special crush washers for proper seating.
Optional (not required) 3 crush washers. NO CRUSH WASHERS ARE INCLUDED
Made in USA.

Special oil inlet banjo bolt for low profile use on GT Ball Bearing turbos such as GT25R/GT28R/GT28RS/GT2871R/GT3071R/GT30R/GT35R (also GT15). Works with most 12mm banjos on the market or can be used with P/N: 40-200-005 12mm to -4AN male banjo fitting if used with (3) special crush washers for proper seating. Optional (not required) 3 crush washers. NO CRUSH WASHERS ARE INCLUDED

ITM Engine Components RX9621 Exhaust Valve
Lesabre Driver Mirror Silver 14W506 DMR-128-14W506
Mix me 3397