Readylift

693485

ReadyLift 69-3485 4.0 Front/1.75 Rear SST Lift Kit for Chevrolet Silverado/Sierra 1500, 2007-2010

EAN: 0804879374763

UPC: 893131001998

Body Lift Kits

At the heart of the system is our all-new 100 percent DOM tubular upper control arm
Includes 3 inch OEM-style cast iron rear lift blocks and u-bolts; rear lift blocks have the correct pinion angle correction and axle locating ears for perfect fit and performance and replaces the factory 1.25 inch rear block
Completing this great new lift system are a set of steel rear shock extensions; no need to replace your great-riding factory rear shocks with inferior aftermarket shocks
These new shock extension brackets keep the rear shocks in the factory mounting position which means your truck will ride great; guaranteed for life against manufacturing defects
All ReadyLift products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals

ReadyLift introduces a new SST lift kit system for the 2007-2010 1500-series Silverado/Sierra 6-lug 4 wheel drive trucks. The 4.0 inch SST lift kit is the result of over six months of extensive product development followed by rigorous on and off road testing. ReadyLift's goal is to provide a true 4.0 inch lift kit that is completely bolt-on; no drilling, cutting or welding required. This system significantly increases ground clearance while allowing for tire sizes up to 33 inch tire on an aftermarket wheel. The most common tire size for this application is 33x12.50 (max). In order to install a 33x12.50 (305/55/20) with aftermarket wheels, some minor trimming of the inner fenderwell may be required. 22x9.5 with 5.5 inch backspacing requires no fender modifications. 17x9 +0 offset on a 285/70R17 will fit with no rubbing. With a 295/70r17 minor trimming/modification required. This kit is designed for use with aftermarket wheels. The ReadyLift 4.0 inch SST lift kit will raise the 2007-2010 Silverado/Sierra 1500 4WD trucks 4.0 inch in front thanks to tough trail-proven 4.0 inch powder coated steel strut extensions that bolt directly to the top of the factory strut. Unlike some kits which require you to cut off the strut studs or break the top hat seal which are irreversible modifications. The rugged strut extensions require no modifications to be made to the strut in order to install the extension. This new heavy-duty control arm features OEM-style ball joints pre-pressed into a strong crown that retains OEM geometry throughout the suspension cycle and doesn't require any modifications to the spindle, that means no drilling or machining to make the ball joints fit the spindle. The new control arms include 90-degree grease fittings to ensure the life of the new polyurethane bushings. Our new trail-tested control arms will provided additional clearance and correct geometry to allow for increased suspension travel.

Idaho ID Zombie Hunting License Permit Green - Biohazard Response Team - Window Bumper Locker Sticker
ACDelco 45C1118 Professional Idler Link
Mix me 4319