Spray Guns & Accessories Accuspray 16570

Accuspray

16570

3M 16570 Accuspray 1.8 mm Model HG09 Spray Gun

EAN: 0663126069025

UPC: 683258083034

Spray Guns & Accessories


Reduces primer consumption
Boosts productivity
Maximizes benefits of 3M "PPS System"
Reduces gun cleaning time and efficiency

Provides the equivalent of a brand new primer spray gun for a fraction of the cost. Kit contains 1 spray gun, 3 atomizing heads and 1 air flow control valve.

The 3M™ Accuspray™ System features a High-Volume Low Pressure (HVLP) spray gun and disposable atomizing nozzles - allowing you to have the equivalent of a brand new spray gun on demand. HVLP spray guns use a large volume of air at low pressure to break up, or atomize, the coating (paints, stains, primers, and adhesives) leaving the nozzle, generating a fine mist. This greatly reduces overspray, saving both clean-up time and materials.

 

Accuspray spray gun kit
Accuspray spray gun kit
View larger
Accuspray with PPS attached
Accuspray gun with PPS cup attached.
View larger

The 3M™ Accuspray™ System HVLP spray gun and the 3M™ PPS™ Paint Preparation System of mixing cups and liners benefits a wide range of users from do-it-yourself woodworkers to technicians in professional woodworking and cabinet shops, sign shops, auto body repair shops, or any other setting that utilizes a paint and coating finish spray booth.

 

Time & Material Savings
The Accuspray gun's precision engineered atomizing head delivers a large usable spray pattern, which allows for decreased production time and increased production rate. Separate fan and fluid needle adjustments provide a soft, tight, adjustable and accurate spray pattern so that the coating lands where it is intended to, which saves both time and materials.

Sanding time is reduced as a result of the flatter, smoother, high quality finish delivered by efficient atomization. The minimal overspray leads to less time masking, bagging, and cleaning up. The replaceable atomizing head design cuts cleaning solvent use and clean-up time.

The 3M Accuspray System functions along with the 3M PPS Paint Preparation System, resulting in coating and material savings, less solvent usage, and less cleaning time. All of these factors can boost productivity and increase profitability in any production facility.

 

Multiple Applications
This spray gun was designed from the inside out for effective, efficient, economical application of paints, adhesives, coatings and finishes for multiple settings such as automotive refinishing, architectural, industrial, sign shops, woodworking, furniture refinishing, and cabinet making.

The Accuspray System complies with a U.S. Environmental Protection Agency law that requires the use of an HVLP (high-volume, low-pressure) spray gun with a three-ounce cup when technicians work outside of a spray booth in a professional production facility. Proper respiratory protection must be worn when mixing and spraying paints and coatings.

Application Method Comparison
There can be several advantages of using an air gun sprayer to apply paint or other coatings as compared with other application methods such as using a brush or roller. Spraying coatings delivers a much higher quality finish, which promotes longer life of the finish. A brush leaves fine lines in the paint or coating that can trap dirt, mold, and mildew, which can sometimes lead to rotting of the wood underneath. Spraying is faster than brushing or rolling, offering significant time savings during application. Time is also saved in the long run due to the longer life of the finish which reduces the need for recoating.

Technical Specifications
Use with an air compressor that produces at least 10 CFM (cubic feet per minute) or more with a 5 horse-power motor or larger. The most common air line used with this spray gun is a 3/8 diameter with a 20-foot or 25-foot line. Technical specs: air consumption 10 cubic feet per minute, first stage operating pressure 30 psi max, full trigger operating pressure 20 psi max, nozzle size 1.8 mm, weight 11.4 ounces. Questions? Call 3M Monday through Friday from 8:00 AM to 5:00 PM CST (Central Standard Time) at 1-877-666-2277.

Related Products (sold separately to complete the system)

For more than a century, 3M has applied innovation and technology to improving our customers" lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M products provide auto paint and body shops, woodworking shops, auto glass shops, mechanics, and do-it-yourselfers solutions ranging from abrasive sheets and striping tapes to spray-paint respirators. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

What"s in the Box:

  • 3M™ Accuspray™ Spray Gun Model HG09 (1 HVLP spray gun)
  • Three (3) 1.8mm atomizing head nozzles
  • 1 air flow control valve
  •  



    3M 16611 Accuspray 1.8 mm Atomizing Head Kit
    3M 16000 PPS Standard Size Kit with 200 Micron Filters
    3M PPS Mixing Cup and Collar, Standard, 22 ounce (650 mL), 16001
    3M (16609) Accuspray 2mm Atomizing Head
    3M (16612) Accuspray 1.4mm Atomizing Head
    Airtex 5S3311 Oxygen Sensor
    Kawasaki 2012 2015 Shroud Assembly 59502 Y001 59502-Y001
    Mix me 4731