Devcon

22045

Devcon 22045 Plastic Welder - 25 ml Dev-Tube

EAN: 0078143220456

UPC: 078143220456

Adhesives & Sealers

Strong structural adhesive formulated for bonding similar or dissimilar materials as well as unprepared metals
Resists weathering, high humidity and temperature variations; cured adhesive can be drilled, sanded and painted
Handling time: 4-5 minutes, Set time: 10-15 minutes, Cure time: 24 hours
Temperature Range: -40 F to 200 F
Suggested Applications: Hard plastic, styrene, PVC, acrylic, ceramic, concrete, fiberglass, metal, vinyl, wood

Devcon Plastic Welder is a strong structural adhesive formulated for bonding similar and dissimilar materials as well as unprepared metals. Resists water, weathering, high humidity and temperature variations. Only mix the amount of product that can be used within the handling time, and always mix equal portions of the adhesive and activator thoroughly together in order for this product to cure properly. Minimal surface preparation is required and once cured, the adhesive can be drilled, sanded and painted. Bonds hard plastic, styrene, PVC, acrylic, ceramic, concrete, fiberglass, metal, vinyl, and wood with a tensile strength of 3500 PSI. Not recommenced for use on copper or brass and does not bond to Polyethylene or Polypropylene Plastics. Temperature Range: -40 degrees Fahrenheit to 200 degrees Fahrenheit. Do not freeze, store between 55 degrees Fahrenheit and 75 degrees Fahrenheit.

Permatex 84145 Permapoxy Black Plastic Weld - 0.84 fl. oz.
Evercoat 412 Metal Glaze - 16 fl. oz.
Transtar 4603 Gray 2-in-1 Primer - 20 oz.