Rotors StopTech 83.188.6D00.74

StopTech

83.188.6D00.74

StopTech (83.188.6D00.74) Brake Rotor, Front

Rotors


2007-2007 > Cadillac > Escalade > Escalade ESV; 380x35mm Rotor; 6 Piston Caliper; Front Bracket Cast# 285C/286C
2007-2007 > Cadillac > Escalade > Escalade EXT; 380x35mm Rotor; 6 Piston Caliper; Front Bracket Cast# 285C/286C
2007-2013 > Cadillac > Escalade > 380x35mm Rotor; 6 Piston Caliper
2008-2008 > Cadillac > Escalade > Escalade ESV; 380x35mm Rotor; 6 Piston Caliper; Front Bracket Cast# 351C/352C
** NOTE: PRODUCT IMAGE MAY NOT BE VEHICLE SPECIFIC

StopTech Big Brake Kits exceed stock performance in two key areas: First larger rotors increase heat capacity allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second stiffer calipers and stainless steel lines reduce system compliance providing consistent pedal feel and confidence-inspiring responsiveness.The key however is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. In contrast a brake upgrade that adds too much front torque (as many do) will reduce your car's ability to maximize the traction available from all four tires robbing you of performance. In addition a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate limiting a driver's control of brake input.Features and Benefits: Balanced Brake Upgrades with optimum brake bias offer the shortest stopping distance with the best pedal feel. Patented AeroRotors offer the best airflow available for better cooling less fade and longer rotor and pad life. StopTech provides the stiffest fully-forged aftermarket calipers with patented removable bridges that provide better clamping under hard braking and less pad taper. StopTech Big Brake Kit components are made in the USA in a 70 000 square foot California manufacturing engineering and R&D center.

Bay State Front CV Joint Boot Kit
MILITARY PATCHES
Mix me 2813