Street Magic

GEN-5.6-15

Universal 5.6 Ohm Harley Davidson Turn Signal Load Equalizer w/ Connectors

Flashers

Recommended for use on Harley Davidson Motorcycles
Simple Installation
Posi-Lock Connectors Included

Stock flasher relays on motorcycles are designed to blink twice as fast as normal when a bulb is burned out to alert the driver of this condition. LEDs consume so little power compared to the stock bulbs, that the flasher relay thinks that a bulb is burned out when LEDs are used in place of stock bulbs. If you have replaced your stock turn signals with LEDs and your turns signals flash too fast or do not flash at all, you will need to add a Equalizer, or replace your flasher relay. Simply locate the turn signal wires and snap into place with the supplied connectors. The load equalizer produces an equivalent load of a 5.6 ohms (2.5 amps @ 14VDC), therefore the unit will get hot. Caution: This load equalizer will get hot, please mount accordingly. Suggested Mounting - Under seat securely mounted to frame rail. Posi-locks included for quick connections. One load equalizer is needed for each pair of turn signal that are replaced with LEDs on most H-Ds.

BMW Genuine Rear brake Repair Kit - Brake Caliper for M3 735i 735iL 750iL E30 E32
PLATINUM DRIVELINE CLUTCH KIT 5-058
Mix me 471