NuGeon Auto Components

22-02328L

NuGeon 22-02328L Remanufactured Semi-Loaded Brake Caliper - Driver Side

EAN: 0736749030243

UPC: 736749030243

Calipers Without Pads

Remanufactured in USA with all new elastomers and hardware; 100 percent pressure-tested with genuine OE testing equipment; restored to new OE equivalent condition
Complete friction-ready unit, including pad installation hardware, banjo bolt (if applicable), mounting bracket (if applicable), parking brake actuating lever (if applicable) and parking brake cable bracket (if applicable)
Only a small percentage of steel pistons and bolts are salvaged in the remanufacturing process; all phenolic and aluminum pistons are replaced with new pistons to OE specifications
Effective rust protection: Bolts and other steel parts are plated, castings are coated with 'PPG RUSTAREST 230' solution and wrapped in VCI paper; the caliper coating may be slightly oily, do not wipe it off or remove it with a brake cleaner
Some units may include a core redemption certificate, allowing the user to return his or her old core to the remanufacturing factory for a partial cash refund; core value and shipping instructions are shown on the certificate

NuGeon Semi-Loaded Brake Calipers are remanufactured in USA to the strict OE and/or SAE specifications. All calipers include hardware. Banjo bolts, mounting bracket, parking brake lever and parking brake cable bracket are included when applicable. They are coated with 'PPG RUSTAREST 230' rust protection and wrapped in OE style VCI (vapor corrosion inhibitor) paper. The remanufacturing process includes: Complete disassembly of caliper cores; only the housing, the bracket, some parking brake components, some steel pistons and some bolts are salvaged; everything else is discarded and replaced with new components. All salvaged parts are degreased, cleaned, shot blasted or sandblasted and rust-protected; all savaged bolts are zinc-dichromate-plated. All salvaged items are checked for excessive wear or rust damage; bolts are checked for straightness; all threads are validated; all non-conforming parts are scrapped. No welding, filling, shaving or helicoils are used on any NuGeon remanufactured calipers. Calipers are reassembled with all new rubber components and hardware. They are 100 percent tested for potential leakage with genuine OE testing equipment; they are torqued and lubricated to OE specifications. An extensive, ISO compliant quality system is used to make sure that all calipers are built to NuGeon specifications. This includes a thoroughly documented and easily accessible set of work instructions on the factory floor and the presence of a full indented bill of materials as well as a master control sample at the assembly line during final assembly. Extensive mistake-proofing is applied at the packaging and labeling stations to make sure that all calipers are complete and properly identified at the end of the line. Each caliper and each label are marked with a date code for product traceability purposes. NuGeon's extensive catalog includes a complete caliper coverage for all automotive, light truck and medium-duty applications.

Fram HPH49A High Performance Full-Flow Oil Spin-On Filter
Motorcraft CX1924 New Air Pump
Mix me 3857