Cycle Therapy

1F7ENKFQ8PN

2002 Kawasaki EX 500 D Ninja Starter Clutch Assembly

Drive Train

The Starter Clutch is essentially a gear that engages in only one direction and rotates freely (disengaged) in the other. This allows the Starter to turn the engine but automatically disengages the Starter after the engine is running. Most commonly, the Starter Clutch is bolted to the Flywheel (Rotor), but can be located elsewhere within the engine.
A used Starter Clutch will be fully functional with all teeth intact. It will engage and disengage properly.
Sample Picture of Starter Clutch Assembly Shown, not necessarily the Starter Clutch Assembly for your bike. You will be shipped the correct part for a 2002 Kawasaki EX 500 D Ninja
Click here to see other parts for your motorcycle
Kawasaki Model Identification Note: On all Kawasaki models produced after 1980, the 7th digit of your motorcycle's VIN (it is a letter) is critical in identifying the model of motorcycle you own. For example, if you own a 2000 ZX6, and the 7th digit of the VIN is an E, then you own a 2000 ZX6 E; If you own a 2001 Vulcan 1500, and the 7th digit of the VIN is a G, then you own a 2001 Vulcan 1500 G. Please confirm the 7th digit of your VIN number before placing your order.

2002 Kawasaki EX 500 D Ninja Starter Clutch Assembly

The Starter Clutch is essentially a gear that engages in only one direction and rotates freely (disengaged) in the other. This allows the Starter to turn the engine but automatically disengages the Starter after the engine is running. Most commonly, the Starter Clutch is bolted to the Flywheel (Rotor), but can be located elsewhere within the engine. The Condition of this part is Used.

A used Starter Clutch will be fully functional with all teeth intact. It will engage and disengage properly.

Click here to see other parts for your motorcycle

Yamaha PW 80 BW80 PW80 throttle cable assembly CB16
DG508 DG457 Ignition Victoria Pickup B267
Mix me 4348