Airpower America
2005
Air Power America 2005LV LiquiVac Oil Changing System for Small Engine
EAN: 0026137020056
UPC: 026137020056
Air Compressors & Inflators
Easy to use; 20 pump strokes creates a powerful vacuum - no electricity needed
Fast - just a few seconds to drain oil from a small engine, takes a few minutes for large engines
3.5 quarts capacity to handle 4-cycle engine oil, changes lawn mowers, garden tractors, generators, snow throwers and more
Portable compact size, allows for easy oil changes in tight spaces
No mess from spills or inconvenient drain plugs - used oil and other liquids are stored safely for proper disposal
Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil. The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 20 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for lawn and garden engines, go-karts, generators, ATVs and more. USA dimensions: 15-1/2 inches length x 8-3/4 inches width x 5 inches, tank size: 3/4 gallon, suction hose length 48 inches.
Your small engine's oil change has never been simpler, cleaner or faster. That’s right, no more oil spilling out all over your driveway or trying to tip your mower, snow thrower, generator, etc. over to access the drain plug. The LiquiVac oil extractor actually vacuums oil out through a hose into a portable reservoir.

From the heavy walled construction HDPE tank to the long lasting leather piston inside, you'll love the LiquiVac’s durable design. Sealable caps and pumps make it easy to transport the oil to your local recycling center.



The LiquiVac oil change vacuum works on any kind of small engine including the following:
- Briggs & Stratton
- Toro
- Snapper
- Yardman
- Troy-Bilt
- Husqvarna
- Cub Cadet
- Bolens
- Honda
- Kubota
- Ariens
- Tecumseh
Small engine manufacturers recommend changing the oil in your small engine after every 25 hours of operation. For a new engine, you'll also need to change the oil after the first five hours of operation. New engines require this extra step to flush out small particles that accumulate naturally during the break-in period. Hours of use are just one factor in determining how often the oil should be changed; the amount of wear and tear is equally important. Just like the oil in a vehicle operated in extremely dirty or dusty conditions or at high speeds, the oil in a lawn mower or other small engine breaks down faster under tough conditions, such as wet grass, heavy dust, high temperatures and rough or hilly terrain.
Applications
Just think of all the small engines you own they all need regular oil changes to keep them running for a long life. Engines such as tillers, ATVs, snow throwers, push and rider mowers, Harleys, generators, power washers, 4- cycle power sports engines (outboards, personal water craft, go-karts, snow mobiles). The list goes on and on. Fortunately, the LiquiVac makes oil changes so easy, clean and fast.
Which Model of LiquiVac Is Right for You?
LiquiVac Small Engine ModelSmall Engine Model
Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.
But, now there’s a simple, fast and clean way to change your lawn and garden equipment’s oil. It’s the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle. Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as.
LiquiVac Large Project/Engine ModelLarge Project/Engine Model
It is called the Large Project/Engine Model for a reason. Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. Plus, they can do it fast, without the mess. Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too.
FloTool 10701 Spill Saver Multi-Purpose Funnel
Hiflofiltro HF183 Premium Oil Filter