Python

HP6304

VENOM HP-630-4, High Flow, Maximum Performance, 30 LB/HR Flow Rate, Fuel Injector Set of 4

EAN: 0661188106672

UPC: 661188106672

Fuel Injectors

Precision balanced set of 4, 30 LB/HR performance injectors
Designed to support up to 385 Horsepower
Universal fit for grommet style, multi-port applications
High impedance (Ohm) coil
Used by top, professional race teams, not for street use

VENOM Performance Fuel Injectors are 100% flow tested, balanced and matched to within +/- 1.5% of their nominal flow rate. These injectors are sold in matched sets. The Fuel Injector Pintle Assemblies are matched and blueprinted to increase flow rate and fuel atomization. All internal O-rings are manufactured of an advanced polyelastamer compound which increases their resistance to fuel chemicals and also, resists damage caused by the higher temperatures performance engines create. The Electromagnetic Coils injector coils are molded of aerospace grade materials and wound with micro-meter tolerances to decrease activation time at the start of each duty cycle. The coils are encased in Kapton tape and molded to protect against electrical current leaching when under severe load. In manufacturing the Electrical Plug VENOM uses solid copper terminals to increase current flow to the coils. Also the terminals and guide pins are slightly oversized to ensure a tighter fit and lesson the chance of corrosion damage, while maintaining a solid electrical connection. The Filter Basket is a fine mesh filter designed to protect the injector internals from contaminant damage. The filter is also manufactured from a fuel/oil resistant polyelastamer. The External Injector Seals are included for each injector and are also designed to withstand the pressures and heat generated by performance applications.

Dropstars 643MS 20 Silver Wheel / Rim 5x4.5 & 5x120 with a 40mm Offset and a 74.1 Hub Bore. Partnumber 643MS-2105740
Toyota 47150 12210 Brake Proportioning Valve 47150-12210
Mix me 4522